404A Automatic Welding Wire Feeder (D76R-2495-220-404A-AV0.8/1.0)

• Customization: Available
• Cooling Way: Air Cooling
• Shielding Gas: Argon Gas
• Model NO.: D76R-2495-220-404A-AV0.8/1.0
• Control: Automatic
• Frequency Range: Low Frequency
• Electric Current: DC
• Type: MIG Mag Wire Feeder
• Wire Feeder Type: Wire Feeder for MIG
• Motor Type: D76r
• Motor Voltage: DC24V
• Motor Output Power: 95W
• No-Load Speed: 220rpm
• No-Load Current: 1.8A
• Stall Torque: 24n.M
• Stall Current: 20A
• Wire Feeder Fram Type: 404A
• Wire Feeder Roll Size: 30*10mm
• Apply for Wire Roll Weight: 15kg, 5kg
• Feed Wire Diameter: 0.6mm 0.8mm 0.9mm 1.0mm 1.2mm
• Max Feed Speed: 22m/Min
• Min Steady Operation Voltage in Load: DC4.5V
• Transport Package: Carton
• Specification: CCC, CE
• Trademark: WEWIN
• Origin: China
• HS Code: 8501310000
• Production Capacity: 60000/Month
• Package Size: 65.00cm * 32.00cm * 24.00cm
• Package Gross Weight: 3.000kg

Product Description

This wire feeder can be used for the welding machine which the welding current is less than 500A,the welding machine can work at spot weld and continu weld.

Motor Paramenters

Motor type: D76R

Motor Voltage: 24V

Motor output power: 65W

No-load speed: 220rpm

No-load current: 1.8A

Stall torque: 24Nm

Stall current: 20A

Wire feeder frame type: 404A

Wire feeder roll size: 30mm*20mm

Maximum feed speed: 22m/min

404 Aluminium casting feed frame

It used four gears (1.25 mode) drive, only 22mm*30mm*10mm wire wheel can be installed to send.

Product Speciality

1.This wire feeder use our own design motor which is special for welding machine with a gear ratio is 20/1,it works at low noise and high torque.

2.The standard motor for this kinds wire feeder is 95W 220RPM,also you can use the 65W 220RPM motor.

3.The roll only use the 30*22mm rolls ,motor can be fixed encoder, hall sensor and optp-switch.